HP SAN Virtualization Services Platform - Manual (Page 15)

2 Using the command line interface
This chapter describes the use of the HP StorageWorks SAN Virtualization Services Platform Data
Path Module (DPM) command line interface (CLI). You can configure and manage the DPM with these
common command sets that provide the same functions as the DPM GUI.
CLI overview
The DPM provides a command line user interface through serial, telnet, and ssh connections with
serial being the preferred default. All configuration, maintenance, and monitoring of the DPM is
performed through the CLI.
Command quick reference by object
Table 2 shows which commands are available for the major object types.
Table 2 Commands by object type
Page Command Object type
26 Disable eth command
eths
31 Enable eth command
40 Modify eth command
51 Set eth command
58 Show eth command
58 Show eths command
28 Disable port command
ports
33 Enable port command
42 Modify port command
43 Modify ports command
48 Reset port command
63 Show port command
64 Show ports command
23 Create user command
users 26 Delete user command
30 Disable user command
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 15