HP ProLiant DL560 Server - Manual (Page 99)

99
Server Specific Troubleshooting
In This Section
Minimum Hardware Configuration ........................................................................................ 99
Server Error Messages.......................................................................................................... 100
When the Server Does Not Boot .......................................................................................... 100
Diagnostic Steps ................................................................................................................... 102
Problems After Initial Boot .................................................................................................. 106
ROMPaq Disaster Recovery................................................................................................. 108
Other Information Resources................................................................................................ 109
Minimum Hardware Configuration
Be sure that the server meets the requirements for a minimum hardware
configuration. During the troubleshooting process, it may be necessary to reduce
the system to its minimum configuration, reinstalling options one at a time to
determine the cause of failure.
Component Minimum Requirements
Processor A processor must be installed in processor 1 socket with a
PPM installed in PPM 1 slot.
Fans The following fans must be installed:
•
•
•
•
•
Fan 1 (processor zone)
Fan 3 (processor zone)
Fan 5 (processor zone)
Fan 7 (processor zone)
Fan 9 (power supply zone)
Memory Slots 1A and 2A must be populated with ECC Registered
DDR SDRAM DIMMs.
Hard Drives One hard drive must be installed.
HP CONFIDENTIAL
File Name: 303212-1new.doc Last Saved On: 11/4/02 10:51 AM