HP ProLiant DL560 Server - Manual (Page 84)

84 HP ProLiant DL560 Server User Guide
For more information on RBSU, refer to the HP ROM-Based Setup Utility User
Guide on the Documentation CD or the white paper on the HP website
(
ftp://ftp.compaq.com/pub/products/servers/management/rbsu-whitepaper.pdf ).
Using RBSU
The first time you power up the server, the system prompts you to enter RBSU,
select an operating system, and select a language. Default configuration settings
are made at this time and can be changed later. Most of the features in RBSU are
not required to set up the server.
To navigate RBSU, use the following keys:
•
•
•
To access RBSU, press the F9 key during power up.
To navigate the menu system, use the arrow keys.
To make selections, press the Enter key.
IMPORTANT: RBSU automatically saves settings when you press the
Enter key. The utility does not prompt you for confirmation of settings
before you exit the utility. To change a selected setting, you must select
a different setting and press the Enter key.
Auto-Configuration Process
The auto-configuration process automatically runs when you boot the server for
the first time. During the power-up sequence that occurs, the system ROM
automatically configures the entire system without needing any intervention.
During this process, the ORCA utility, in most cases, automatically configures
the array to a default setting based on the number of drives connected to the
server.
HP CONFIDENTIAL
File Name: 303212-1new.doc Last Saved On: 11/4/02 10:51 AM