Configuring online spare memory, System maintenance menu – HP ProLiant DL560 Server User Manual
Page 86
86
HP ProLiant DL560 Server User Guide
Configuring Online Spare Memory
To configure online spare memory:
1. Install the required DIMMs ("Memory Options" on page 59).
2. Access RBSU by pressing the F9 key during powerup when the prompt is
displayed in the lower right corner of the screen.
3. Select
System Options.
4. Select
Advanced Memory Protection.
5. Select
Online Spare with Advanced ECC Support.
6. Press
the
Enter key.
7. Press
the
Esc key to exit the current menu or press the F10 key to exit
RBSU.
For more information on online spare memory, refer to the white paper on the HP
website
(
System Maintenance Menu
The System Maintenance Menu is a new utility that replaces the legacy system-
partition functionality supported on some ProLiant servers. This utility is
embedded in the system ROM and provides access to server diagnostics, RBSU,
and the Inspect Utility.
To access the System Maintenance Menu, press the F10 key when prompted
from the boot option screen ("Boot Options" on page 85).
From the menu, you can select from the following utilities that are embedded in
the system ROM:
•
•
The ROM-Based Setup Utility (on page 83) performs a wide range of
configuration activities, including configuring system devices and selecting
operating systems and boot controllers.
The ROM-Based Inspect Utility enables you to view system configuration
information and save the information to a file on a diskette.
HP CONFIDENTIAL
File Name: 303212-1new.doc Last Saved On: 11/4/02 10:51 AM