HP ProLiant DL560 Server - Manual (Page 62)

62 HP ProLiant DL560 Server User Guide
Hot-Plug SCSI Hard Drive Options
When adding SCSI hard drives to the server, observe the following general
guidelines:
•
•
•
•
•
A maximum of two SCSI devices can be added.
The system automatically sets all SCSI IDs.
If only one SCSI hard drive is used, install it in the bay with the lowest SCSI
ID number.
Hot-plug hard drives must be either Wide Ultra2, Ultra3, or Ultra4 SCSI
types. Mixing these types with other drive standards degrades the overall
performance of the drive subsystem.
Drives must be the same capacity to provide the greatest storage space
efficiency when drives are grouped together into the same drive array.
Refer to "Front Panel Components (on page 8)" for the server SCSI ID
assignments.
HP CONFIDENTIAL
File Name: 303212-1new.doc Last Saved On: 11/4/02 10:51 AM