HP ProLiant DL585 G2 Server - Manual (Page 43)

Hardware options installation 43
3. Close the ejector lever.
4. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (" SAS and
SATA hard drive LED combinations " on page 10 ).
Installing DVD, CD-ROM, or diskette drives
The server is shipped with one DVD drive. You can install an optional DVD drive, CD-ROM drive, or a
3.5-inch diskette drive.
To install an optional media drive:
1. Power down the server (on page 27 ).
2. Use the T-15 Torx screwdriver to eject the drive or drive blank, and pull it out of the server.
NOTE: The T-15 Torx screwdriver is shipped with the server and can be located on the rear
panel (" Rear panel components " on page 11 ).