HP ProLiant DL585 G2 Server - Manual (Page 29)

Operations 29
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
IMPORTANT: When removing the access panel to view the Systems Insight Display LEDs (on
page 16 ), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
1. Extend the server from the rack (" Extending the server from the rack " on page 27 ).
2. If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
NOTE: The T-15 Torx screwdriver is shipped with the server and can be located on the rear
panel (" Rear panel components " on page 11 ).
3. Lift up on the hood latch, and remove the access panel.
4. After installing hardware options, replace the access panel. Be sure that the panel is securely locked
into place before powering up the server.
Accessing the Systems Insight Display
IMPORTANT: When removing the access panel to view the Systems Insight Display LEDs (on
page 16 ), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
1. Extend the server from the rack (" Extending the server from the rack " on page 27 ).
2. Remove the access panel (" Removing the access panel " on page 28 ).
3. Locate the Systems Insight Display (" Media board components " on page 14 ).