Systems insight display leds – HP ProLiant DL585 G2 Server User Manual
Page 16
Component identification 16
Systems Insight Display LEDs
The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM might
report server status differently than the health LEDs because the software tracks more system attributes. The
System Insight Display LEDs identify components experiencing an error, event, or failure.
The Systems Insight Display LEDs are located on the media board. In normal operations, all of the LEDs
are off unless one of the components fails.
IMPORTANT:
When removing the access panel to view the Systems Insight Display LEDs (on
page
), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
NOTE:
The system management driver must be installed for the internal system health LED to
provide pre-failure and warranty conditions.
LED Component
PS1
Power supply (primary)
PS2
Power supply (optional)
CPU BD (Power Fault)
Processor memory module board
I/O BD
System board
NMI
System NMI switch
SLOT X
Expansion slot
CPU BD (Interlock Error)
System board
PPM X
Processor power module
1A–32D DIMM
slot
PROC X
Processor
FAN X
Fan
See the HP ProLiant DL585 Generation 2 Server Maintenance and Service Guide on the Documentation
CD for more information.