HP ProLiant DL585 G2 Server - Manual (Page 34)

Hardware options installation 34
6. Release the latch, and open the cover.
Installing a processor
CAUTION: To avoid damage to the processor and system board, only authorized personnel
should attempt to replace or install the processor in this server.
CAUTION: To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
CAUTION: Processor and PPM sockets 1 and 2 must be populated at all times or the server
will not function properly.
CAUTION: To help avoid damage to the processor and system board, do not install the
processor without using the processor installation tool.
To install a processor:
1. Locate and download the latest ROM version from the HP website
(
http://h18023.www1.hp.com/support/files/server/us/romflash.html ). Follow the instructions on
the website to update the system ROM.
2. Power down the server (on page 27 ).
WARNING: Use caution when installing the processor memory module or removing the
processor memory module; when fully populated, it can weigh up to 13.6 kg (30 lb).
3. Remove the processor memory module, and open the cover (" Removing the processor memory
module " on page 32 ).
WARNING: To reduce the risk of personal injury from hot surfaces, allow the heatsink to cool
before touching it.