beautypg.com

HP Integrity NonStop H-Series User Manual

Page 87

background image

NonStop AutoTMF Software Commands

HP NonStop AutoTMF Software User’s Guide429952-013

6-15

ADD ATMFPROGRAMS

STRONG isolation commits outstanding transactions whenever the
process does one of the following:

°

issues a READ or a WRITE to a device,

°

issues a WRITE to a non-audited disk file

ISOLATION overrides the value of the global parameter ATMFISOLATION.

MAXTIME 1-to-n-seconds

specifies that transactions should be committed after n seconds. The value of n
should be a power of 2 (1,2,4,8,16,32,...) in the range of 1 to 4096. If the value
specified is not a power of 2, the value will be rounded to a power of 2.

The default is 16 seconds.

MAXTX 1-to-1000

specifies the maximum number of concurrent transactions a program can
process. MAXTX is rounded up to the next multiple of 100 when NonStop
AutoTMF software opens the TFILE ($TMP).

The default is 100.

If an application program opens the TFILE with a transaction depth greater
than 100, NonStop AutoTMF software also increases its current value of
MAXTX to the value specified by the program, rounded up to the next multiple
of 100.

An application program must open the TFILE before NonStop AutoTMF
software opens the TFILE in order to have the maximum depth increased
under program control. Once NonStop AutoTMF software has opened the
TFILE, NonStop AutoTMF cannot close and reopen the TFILE with the desired
depth. In such cases, configure MAXTX specifically if a value larger than 100 is
desired.

MAXTX overrides the value set through the global parameter ATMFMAXTX.

MAXUPDATES 1-to-n

specifies that transactions should be committed after n updates and inserts.
The value of n should be a power of 2 (1,2,4,8,16,32,...) in the range of 1 to
4096. If the value specified is not a power of 2, the value will be rounded to a
power of 2.

The default is 32.

NOTX

disables automatic transaction processing in the program.

Note. You can set MAXTX to a value greater than 100 only on NonStop servers that
support a maximum of 1000 transactions (T9055AER and later)

This manual is related to the following products: