HP Deskjet 6840 Color Inkjet Printer - Manual (Page 96)

Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray.
3. Slide the paper-width guide all the way to the left, and then pull out the paper-
length guide.
4. Place iron-on transfer paper with the side to be printed on facing down in the
In tray.
5. Push the paper into the printer until it stops.
6. Slide the paper guides firmly against the paper.
7. Lower the Out tray.
Printing
Note: If your software program includes an iron-on transfer printing feature, follow
the instructions that are provided with the software program. Otherwise,
follow the instructions below. Also, some iron-on transfer paper types do
not require you to print a mirror image.
1. Open the Printer Properties dialog box.
2. Click the Paper/Quality tab, and then specify the following print settings:
• Size is: The appropriate paper size
• Source is: Upper Tray
• Type is: HP Iron-on Transfer
• Print Quality: Normal or Best
3. Click the Basics tab, and then specify the following print settings:
• Orientation: Mirror Image (if required for the paper type you are using)
4. Select any other print settings that you want, and then click OK.
Use the What's This? help to learn about the features that you see in the Printer
Properties dialog box.
HP Deskjet 6800 series printer
96