HP NonStop G-Series - Manual (Page 45)

Silo Media Manager Installation and Users Guide
Hardware and Software Installation for the Client 3-5
Figure 3-4 Configuration Main Menu
3.5.1 VIEW_CONFIG
To view the current configuration, type “VIEW_CONFIG”. This will show the
Client port number, server (host) port #, BACKUPCPU and server (host) IP address.
3.5.2 CONFIG_PORT#
To add or change the TCPIP port number, type “CONFIG_PORT#” at the main menu
prompt. Enter the new port number when the prompt asks for it. Next, the new
configuration will be shown, and confirmation on the new configuration will be
requested. Type “Y” or “N”.