HP NonStop G-Series - Manual (Page 141)

9710 SMM Installation and Users Guide
Appendix D - 10
CONFIG_DRIVE
When the main menu prompt returns, type CONFIG_DRIVE to configure a drive. Once
CONFIG_DRIVE is typed, the prompt will ask which drive to configure (1-10 from
bottom to top). Choose the drive to be configured. Enter the new name for the drive and
the new node. The new configuration will be shown and confirmation will be requested.
Type Y, if the new configuration is correct. The system will save the new configuration
and then ask if the continued configuration of drives is wanted. To continue configuring
drives, type Y and repeat the process. If drive configuration is finished, type N, and the
main menu prompt will return.