HP NonStop G-Series - Manual (Page 42)

Silo Media Manager Installation and Users Guide
Hardware and Software Installation for the Client 3-2
3.4 Transferring Files
To begin transferring files, click on the “FTP” button (the single green arrow) on the
toolbar. Figure 3-1 is the toolbar.
Figure 3-1 Silo Media Manager Toolbar
The FTP window (Figure 3-2) will prompt you to enter the Tandem Host Information.
This consists of the following:
•
Host IP address
•
User name
•
Password
• Host Path Name
The host IP address will depend on which system is being used as the client. The user
will need to be a Super-Group ID.
Note: The password is case sensitive. Be sure to type the password in its original
case whether it is lower or upper case.
After the Tandem Host Information, select a host path name. The host path name is
the location of the SMM Client files. The locations should be $SYSTEM.TSISMMC.