HP NonStop G-Series - Manual (Page 15)

Silo Media Manager Installation and Users Guide
Hardware and Software Installation for the Server 2-4
At TACL prompt, check to see if the TCPIP^PROCESS^NAME PARAM is set by
typing “PARAM” at the prompt. The following is an example as to what should be
done in this case:
$SYSTEM.TSISMMS > PARAM
TCPIP^PROCESS^NAME .$ZTC0.
If a TCPIP^PROCESS^NAME PARAM is not set, it must be added. Simply type
PARAM TCPIP^PROCESS^NAME and press enter.
The following is an example as to what is seen:
$SYSTEM.TSISMMS > PARAM TCPIP^PROCESS^NAME $ZTC0
At the TACL prompt, type “RUN CONFIG”. A password must be used. Select a
password and press enter. A Help menu will scroll up with the configuration options.
Figure 2-5 shows the Configuration Menu.
Figure 2-5 Configuration Main Menu
2.5.1 VIEW_CONFIG
To view the current configuration, type VIEW_CONFIG. It shows the device name,
the device node, the host port #, the alternate system #, BACKUPCPU and all of the
drive configurations.