HP Linux Server Management Software - Manual (Page 44)

Toolkit utilities 44
Category Options Description
Control Action
Method These options define the overall behavior of ACU
when it processes scripts and creates configurations.
Control options can occur only once in a script file
and must be listed first.
Controller Controller
ChassisName
ClearConfigurationWithDataLoss
DeleteLicenseKey
DPOEnable
ElevatorSortEnable
ExpandPriority
IRPEnable
LicenseKey
MNPDelay
PreferredPathMode
QueueDepth
ReadCache
RebuildPriority
SSPState
SurfaceScanDelay
WriteCache Options in this category specify the controller that is to
be configured (or the controller that had its
configuration captured). Although the Controller option
must begin this section of the script, you can script
other options in this category in any order.
You can use one script file to configure all controllers
in a system, and you can configure the controllers
identically or individually. If you define each controller
configuration individually, enter the option values for
one controller and its arrays and logical drives before
specifying the option values for another controller.
Array Array
Drive
DriveType
OnlineSpare These options describe an array that is to be
configured on the controller that was previously
specified in the script. (If no controller was previously
specified, ACU stops processing the script and creates
an error file.) Although the Array option must begin
this section of the script, you can script the other
options in this category in any order.
Logical
Drive
ArrayAccelerator
LogicalDrive
LogicalDriveSSPState
ParityGroups
PreferredPath
RAID
Sectors
Size
SSPAdaptersWithAccess
StripeSize These options describe a logical drive that is to be
configured on an array that was previously specified
in the script. (If no array was previously specified,
ACU stops processing the script and creates an error
file.) Although the LogicalDrive option must begin this
section of the script, you can script the other options in
this category in any order.
HBA ConnectionName
HBA_WW_ID
HostMode These options specify an HBA that is to be configured.
Control category
The Control category has the following options:
• Action mode (on page 45 )