Reboot return codes, Reboot command-line examples, Using setbootorder – HP Linux Server Management Software User Manual
Page 28: Setbootorder command-line syntax, Setbootorder command-line arguments, Reboot return codes reboot command-line examples
Toolkit utilities 28
Command line argument
Description
the next reboot, and the system is restarted. If no argument is provided,
then the system is set to boot using the defined boot order.
/?
This argument displays help information.
REBOOT return codes
There are no return codes for the REBOOT utility.
REBOOT command-line examples
Command-line argument
Description
REBOOT A:
This command reboots the system to the A: drive.
REBOOT PXE
This command reboots the system by itself to the PXE NIC.
Using SETBOOTORDER
SETBOOTORDER enables you to set the order in which devices are booted, including diskette drives, CD-
ROM drives, hard drives, PXE, and USB devices. This utility sets the boot order only for devices that exist
for a server. The devices can be set to boot in any order.
SETBOOTORDER cannot be used to set the storage controller order. You must use the CONREP utility. For
more information about setting the controller order, see "Using CONREP (on page
)."
NOTE:
Any changes you make to the SETBOOTORDER will take affect at the next reboot. For
HP ProLiant 100 series server’s only one device can be set as the boot device and others
cannot be re-ordered.
SETBOOTORDER command-line syntax
setbootorder [floppy cdrom pxe hd usb | default] [/?]
SETBOOTORDER command-line arguments
Options are disabled if not listed in the argument.
Command line argument
Description
floppy cdrom pxe hd usb
The order of these arguments sets the boot order for the system
devices. Each term can be used only once in any order. It is not
necessary to use all terms. HP ProLiant 100 series servers can only
pass in one option.
default
This argument resets the boot order to the factory default.
/?
This argument displays help information.