HP 3PAR Application Software Suite for Oracle Licenses - Manual (Page 168)

3PAR1168: ERROR: One or more Virtual Copy's repository exist.
REASON
Trying to execute rmora_rmrep to remove the backup repository for a database configuration
failed as there one or more Virtual Copy repositories still exist.
SOLUTION
Run rmora_remove to remove the all of the Virtual Copies before running rmora_rmrep. Make
sure the Virtual Copies are no longer being used.
MESSAGE ID
1169
SYMBOLIC NAME
RMO_ERROR_UNSUPPORTED_DEVFMT
MESSAGE
3PAR1169: ERROR: Unsupported device format: %s.
REASON
In Linux, refer to the Preinstallation Requirements section for the current supported OS device format.
SOLUTION
Use the supported device format for datafiles and archive log destinations.
MESSAGE ID
1170
SYMBOLIC NAME
RMO_ERROR_SYNCRCOPY
MESSAGE
3PAR1170: ERROR: Could not perform synchronization for RC group .
REASON
Synchronization for the specified Remote Copy group failed.
SOLUTION
Check the log file to see the detailed error message. Make sure the Remote Copy group is configured
properly and make sure the Remote Copy group contains the correct volumes.
MESSAGE ID
1172
SYMBOLIC NAME
RMO_ERROR_MAXVC_EXCEED
MESSAGE
3PAR1172: ERROR: The maximum number of Virtual Copy must be between 1 and 500 (inclusive).
REASON
During configuration, the provided maximum number of Virtual Copies cannot exceed the system
allowed number, which is now 500.
SOLUTION
Specify a number between 1 and 500 (inclusive).
MESSAGE ID
1173
SYMBOLIC NAME
168 Troubleshooting