Manage supplies and accessories, Print when a cartridge is at estimated end of life, Supplies messages – HP Color LaserJet Enterprise M750 Printer series User Manual

Page 96

Manage supplies and accessories

Print when a cartridge is at estimated end of life

Supplies messages

●

Low—where is the color of the supply, and is the type of

supply. The product indicates when a supply level is low. The actual print cartridge life remaining

can vary, but the supply does not need to be replaced now. Consider having a replacement

cartridge available to install when the print quality is no longer acceptable. This alert appears

only when Very Low is set to

Stop

●

Very Low. The product indicates when a supply level is very low. The actual

print cartridge life remaining can vary. Consider having a replacement cartridge available to

install when the print quality is no longer acceptable. Once an HP supply has reached very low,

the HP Premium Protection Warranty on that cartridge has ended.

Print-quality problems can occur when using a supply that is at its estimated end of life. The print

cartridge does not need to be replaced at this point in time unless the print quality is no longer

acceptable.

Enable or disable the Very Low Settings options from the control panel

You can enable or disable the default settings at any time, and you do not have to re-enable them

when you install a new cartridge.

At the product control panel, press the Home button .

Open the following menus:

●

Administration

●

Manage Supplies

●

Supply Settings

●

Black Cartridge or Color Cartridges

●

Very Low Settings

Select one of the following options:

●

Select the Continue option to set the product to alert you that the cartridge is very low, but

to continue printing.

NOTE:

Using the Continue option allows printing beyond Very Low without customer

interaction and can result in unsatisfactory print quality.

●

Select the

Stop

option to set the product to stop printing (including printing faxes) until you

replace the cartridge.

●

Select the Prompt to continue option to set the product to stop printing (including printing

faxes) and prompt you to replace the cartridge. You can acknowledge the prompt and

continue printing.

If you select the

Stop

or Prompt to continue option, the product stops printing when it reaches the

Very Low threshold. When you replace the cartridge, the product automatically resumes printing.

86 Chapter 6 Manage and maintain

ENWW