HP Color LaserJet Enterprise M750 Printer series - Manual (Page 122)

4. Paper could be jammed inside the fuser
where it would not be visible. Open the fuser
jam access door. If paper is jammed inside
the fuser, gently pull it straight up to remove
it. If the paper tears, remove all paper
fragments.
CAUTION: Even if the body of the fuser has
cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers until they
have cooled.
If no paper is found but the product still
reports a jam, remove the fuser to check for
jammed paper inside the fuser cavity.
Remove any paper, and then reinstall the
fuser.
NOTE: Make sure that the fuser is
reinstalled correctly before closing the upper
right door.
5. Close the upper right door.
112 Chapter 7 Solve problems ENWW