HP Integrity NonStop J-Series - Manual (Page 74)

NOTE: You can configure any number of servers based on your requirement. If you do not
specify the number of servers, the default value (maxserver=5, initserver=1, and
idleserver=1
) is assumed.
3. Stop the datasource:
mxci>> stop ds MFC_datasource, reason 'test';
NOTE: This step must be performed only if you have a configured datasource in the started
status.
4. To enable the MFC feature, add the statement_module_caching environment variable
to the datasource:
mxci>> add evar $mcbs."MFC_datasource".statement_module_caching, type set,
value 'true';
NOTE: MFC can have only two values: true or false.
5. Add the compiled_module_location environment variable to the datasource:
mxci>> add evar $mfc."MFC_datasource".compiled_module_location, type set,
value 'default';
NOTE: The compiled_module_location can be set to a value other than default, such
as, /usr/sash. However, you must ensure that the directory is created before specifying it.
mxci>> add evar $mfc."MFC_datasource".compiled_module_location, type set,
value '/usr/sash';
6. Start the datasource:
>> start ds $mfc."MFC_datasource";
For more details, see the JDBC Type 4 Driver 2.0 Programmer's Reference.
Modifying the Spring Application
NOTE: If the default datasource is configured for MFC, do not modify the Spring application.
To use the MFC feature, modify the Spring application by using the following steps:
1. Modify the applicationContext.xml file as follows:
•
To set serverDataSource to the datasource name on which MFC is configured, add
the following under connectionProperties tag.
MFC_datasource
74 Configuring Spring Applications on NonStop Systems