HP StorageWorks DLT VS80 Tape Drive - Manual (Page 26)

unix configuration guide
hp learning products
http://www.hp.com/support/tape may have a later version
UNIX configuration
introduction
hp systems
compaq systems
ibm RS/6000 systems
pc based UNIX systems
silicon graphics
sun systems
verify installation
UNIX glossary
This topic is available in English only. Click in the top right-hand corner to
close the window and return to the tape drive user's guide.
hp compaq ibm RS/6000
pc based
UNIX
silicon
graphics
sun
This guide provides basic information on configuring HP tape drives with various
operating systems. The table below lists the models for which this information is
appropriate.
Model
Type
Maximum
Capacity
(assuming 2:1
compression)
Identifier String for
UNIX Configuration*
HP Surestore
Ultrium 230 Ultrium drive 200 GB HP------Ultrium **
HP Surestore
Ultrium 215 Ultrium drive 200 GB HP------Ultrium **
HP Surestore
DAT24 DDS drive 24 GB HP------C1537A **
HP Surestore
DAT 24x6
DDS
autoloader
24 GB on each
cartridge
HP------C1557A **
HP Surestore
DAT40
DDS drive 40 GB HP------C5683A **
HP Surestore
DAT40x6 DDS
autoloader 40 GB on each
cartridge
HP------C5713A **
HP Surestore DLT
80 DLT drive 80Gb QUANTUM-DLT8000 **
HP Surestore
DLT1 DLTvs drive 80Gb BNCHMARKDLT1 **
HP Surestore DLT
VS80 DLTvs drive 80Gb BNCHMARKDLT1 **
*Drive Identification in UNIX Configuration: These strings should be used in
UNIX scripts wherever the drive type has to be identified. There are no hardware
configuration switches.
** Dashes (-) indicate spaces
© 2001, Hewlett-Packard Company
file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/dltvs80%20manual/document/common/unix/reseller/eng/c_intro.htm [11/29/2001 8:34:19 AM]