HP XP Business Copy Software - Manual (Page 77)

4. Set the copy pace (Slower, Medium, or Faster) and split type (Quick or Steady) for all pairs being
created and split.
5. Specify the S-VOLs as follows:
a. Select the P-VOL.
b. In the Select MU list, select the MU number (0, 1, or 2) for the L1 pair to be created.
c. Select the port in the Port list, display either reserved or unreserved volumes, and click the
S-VOL.
d. Click Set to add the S-VOL to the selected P-VOL. The S-VOL is now displayed next to the
selected P-VOL.
e. To add another S-VOL to the same P-VOL, repeat step 5c — step 5d. Each pair to be created
and split is displayed separately in the list of pairs.
6. Repeat step 5 until the L1 pairs are displayed. Click Change to replace S-VOLs, click Set to add
L1 S-VOLs, and use the Delete command to remove pairs.
7. To create and split L2 cascade pairs, add the L2 S-VOLs to the L1 pairs as follows:
a. Select the L1 pair from the list of pairs to be created and split.
b. Ensure that the L1 pairs are split (status = PSUS).
c. In the Select MU list, select the MU number (1 or 2) for the L2 pair to be created.
d. From the Pairsplit Volume List, select the volume to assign as the S-VOL for the L2 pair.
e. Click Cascade to add the L2 S-VOL to the selected L1 pair. The new L2 pair is now displayed.
f. To add another L2 S-VOL to the same L1 pair, repeat step 7b — step 7e. Each L2 pair to
be created and split is displayed separately in the list of pairs.
8. Repeat step 7 until the pairs are displayed. Click Change to replace S-VOLs, click Cascade to
add L2 S-VOLs, and use the Delete command to remove pairs.
9. When the Pairsplit window displays the L1 and L2 pairs, click OK to reflect the settings to the
Preset Volume list on the BC main screen.
10. In the BC main screen, click Apply to create and split the pairs.
When the pairsplit operations start, the BC main screen shows new pairs with COPY(SP) or
PSUS(SP) status.
11.
Click Refresh ( ) to monitor the progress of the pairsplit operations.
Resynchronizing BC pairs (Pairresync)
The Pairresync window displays pair information for pairs selected on the BC main screen. Use the
Pairresync window to resynchronize pairs. To open the Pairresync window, select one or more PSUS
or PSUE pairs in the Volume list on the BC main screen, right-click the selected pair, and select
Pairresync.
XP Business Copy User Guide 77