Getorigfpts command, Getorigfpts command - file name method, Getorigfpts command - file code and buffer method – HP Integrity NonStop H-Series User Manual
Page 51: Displaystatistics command
SWID Server Interface
Software Identification (SWID) User’s Guide— 527243-004
6 -7
Using SWID as a Server
GetOrigFpts Command
This command is used to obtain only the original fingerprint of a disk file when the file
code is known and when the first 2048 bytes are read by the application process.
With the
GetOrigFpts
command, the application can use either of the next two
methods.
GetOrigFpts Command - File Name Method
In this case, the file name is provided in the
fname
field. All other fields must be nulls.
The application gives only one file name and no file set in the
fname
field. If the
fname
is invalid, SWID replies with errors
ReplyLen = 0
and
Reply Error = 13
.
GetOrigFpts Command - File Code and Buffer Method
The application indicates the file code by using the
fcode
field. It also lists the first
2048 bytes of the file provided in the
buf
field. The
buflen
field contains 2048. When
using this method, the
fname
field must contain nulls.
The
rectype
of
FO-REC
is always set to default when you use the
GetOrigFpts
command. For the record structure of
def-rec,
see
If the original fingerprint cannot be computed for whatever reason, the original error
field of
def-rec
contains a -2 to indicate
*n/a*
.
DisplayStatistics Command
This command is used to obtain the run statistics of a SWID server process. The reply
from SWID consists of one
FO-REC
record with a
rectype
of
ds
. The record structure
of
ds-rec
is:
* SWID Formatted Input: GetOrigFpts Command Structure
def GetOrigFpts-Rec.
03 rectype type binary 16 value is 1.
03 fname type character 36.
03 fcode type binary 16.
03 buflen type binary 16
must be 0 thru 2048.
03 buf type character 1
occurs 0 to 2048 times
depending on GetOrigFpts-Rec.buflen.
end.
*SWID Formatted Input DisplayStatistics Command Structure
def ds-rec.
03 DispStats-Rec type binary 16 must be 9.
end.