Avaya 5620SW + EU24 - Manual (Page 53)

Function Key Features Function Keys - Page 53
IP Office (R3.0) 5620SW + EU24 User’s Guide Function Keys - Page 53
40DHB0002USEP – Issue 1 (13th January 2005) Function Key Features
SAC - Send All Calls (!)
Switch do not disturb on/off.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
The SAC key switches "do not disturb" on/off. When on, SAC is shown with a
symbol and the display includes an N (No calls).
When SAC is on, callers receive busy tone or are diverted to voicemail. For each user
the System Administrator can set which numbers can still call when SAC is on. If the
extension user has Phone Manager, they can set those numbers themselves. With a
call already connected and another call already alerting, activating SAC will not affect
the already alerting call.
[User | Digital Telephony | Emulation | Send All Calls]
See also:
• DNDOn - Do Not Disturb On on page 36.
Spres - AD Suppress (!)
Replace the display of dialed digits with s characters.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
The programmed Spres key toggles the display of dialed digits on/off. When on,
Spres is shown with a symbol and each dialed digit is replaced by s on the display.
[User | Digital Telephony | Emulation | AD Suppress]
Steal - Call Steal
Take over a call from a specified extension or retrieve a call just transferred or
forwarded. This function cannot be programmed through the phone by the user.
If a target extension number is entered when this function is programmed, Steal
displays that number. Pressing Steal when the target extension has a call will take
over the call.
If no target extension number is entered when the function is programmed, Steal
retrieves the last calls transferred from the extension. This includes calls diverted to
voicemail.
Notes: 1. Target extension must not have Cannot Intrude set.
2.
Extension with Steal allocated must also have Can Intrude set.
[User | Digital Telephony | Advanced | Call | Call Steal]
SusCW - Suspend CW
Suspend the current call at the exchange and answer the waiting call.
If no exchange slot number is specified when the function is programmed, exchange
slot 0 is used. This function cannot be programmed through the phone by the user.
Pressing SusCW is only supported if the exchange provides a Q.931 suspend call
facility.
[User | Digital Telephony | Advanced | Suspend | Suspend CW]
See also:
• Resum - Resume Call on page 52.