Avaya 5620SW + EU24 - Manual (Page 32)

Page 32 - Function Key Features Function Keys
Page 32 - Function Keys IP Office (R3.0) 5620SW + EU24 User’s Guide
Function Key Features 40DHB0002USEP – Issue 1 (13th January 2005)
AD - Abbreviated Dial (!)
Dial the displayed number.
This function requires entry of a number to dial when programmed. The AD key
displays that number. This function can be programmed through the phone by the user.
The number does not have to be a complete number, the user can dial additional digits
after pressing
AD. * and # can be entered in the number to match IP Office
shortcodes.
[User | Digital Telephony | Emulation | Abbreviated Dial]
See also:
• Dial (#) on page 30.
• Prog - Abbreviated Dial Program (!) on page 49.
Admin - Self-Administer (!)
Access menus for programming functions against display keys.
This function can be programmed with or without data. If programmed with a setting of
1, the key accesses a different set of functions. See Function Key Programming on
page 28. This function can be programmed through the phone by the user using an
existing
Admin key.
The Admin key gives access to the menus for programming functions against
and keys.
[User | Digital Telephony | Emulation | Self-Administer]
Apear - Appearance
Add a display line for call appearances with symbols being displayed for Incoming
Calls, Connected and On Hold. See Error! Reference source not found. on page
Error! Bookmark not defined..
This function does not require any data entered when programmed. However it is
normal to enter some text such as a=, b= and so on for each call appearance key.
This function cannot be programmed through the phone by the user.
[User | Digital Telephony | Emulation | Appearance]
AutCB - Automatic Callback (!)
Sets a callback when free on busy extensions and callback when next used on
unanswered extensions.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
When the called target extension does not answer or is busy, pressing AutCB sets
a callback on that extension. Whilst the callback is set, AutCB is shown with a
symbol. Pressing
AutCB again cancels the callback.
Hence, when the callback target extension becomes free or is next used, pressing
starts a call to that extension.
[User | Digital Telephony | Emulation | Automatic Callback]
See also:
• RBak - Cancel Ringback When Free on page 50.
• RBak+ - Ringback When Free on page 50.