HP Scanjet Enterprise 7500 Flatbed Scanner - Manual (Page 33)

TIP: The scanner software CD which came with your product includes an animation which guides
you through removing and replacing the separation pad. This animation is also available at
www.hp.com/support .
To replace the separation pad, follow these steps:
1. Press the Power ( ) button to turn off the scanner, and then disconnect the USB cable and
power supply from the scanner.
2. Open the automatic document feeder (ADF) hatch.
3. Press forward (toward the rear of the ADF) on the separation pad latch to release the separation
pad.
TIP: This is easier to do if you raise the ADF input tray slightly.
ENWW Replace the separation pad 27