HP Scanjet Enterprise 7500 Flatbed Scanner - Manual (Page 11)

HP Scanner Tools Utility
Use the HP Scanner Tools Utility to configure the list of scan profiles on the scanner front panel, to
create scan profiles that use third-party scanning software, to change the scanner's power
management settings, and to find information about scanner settings, status, and maintenance.
To open the utility, do one of the following:
● Double-click the HP Scanner Tools Utility icon on the desktop.
● Press the Tools ( ) button on the scanner front panel.
● Click Start, point to Programs or All Programs, point to HP, point to Scanjet, point to 7500, and then
click Scanner Tools Utility.
For more information, see the HP Scanner Tools Utility Help.
Power use
By default, the scanner will enter Sleep Mode after 15 minutes of inactivity, and will turn off
automatically after two hours of inactivity to conserve power. 'To change the default settings or
disable these modes, complete these steps.
1. Press the Tools ( ) button to start the HP Scanner Tools Utility.
2. Click the Settings tab, and then select the appropriate Sleep Mode and Auto-Off settings.
● To specify the period of inactivity after which the scanner goes into Sleep Mode, select 15
minutes or Never from the Sleep: Put the scanner to sleep after: drop-down list.
● To specify the period of inactivity after which the scanner automatically turns off, select the
appropriate value from the Auto-Off: Turn off the scanner after: drop-down list.
ENWW Power use 5