HP OneView for Microsoft System Center - Manual (Page 22)

Configured VC Domains view
The Configured VC Domains view shows all the Virtual Connect domains that have been configured
for management by the Fabric Add-in PowerShell cmdlets. When a domain is registered using
Powershell it shows up in this view.
NOTE: If one or more configured domains do not show up in the view, select Refresh All Data
from the Actions menu to update the Add-in’s internal cache of configured domains.
Figure 16 Configured VC Domains view
Comment Label
VC External Manager locking state (LOCKED or
UNLOCKED) Ext.Man.Lock State
Displays the Virtual Connect domain name Domain Name
Displays the Virtual Connect ID as reported by VCM Domain ID
Displays the current status of the VC domain as reported
by VCM Domain Status
Displays the Current FW version of the primary VC module
in the VC domain Current FW Version
Displays the IP address of the primary VC module in the
domain Primary VCM IP
Displays the IP address of the StandBy VC module in the
VC domain StandBy VCM IP
Displays the static IP address of the VC domain Domain VCM IP
Refresh Domain Data
If a discovered domain’s configuration changes, the internal Add-in cache must be updated.
To update domain data:
Right click on the domain and select Refresh Domain Data, see Figure 17 (page 23) .
22 Using the HP SCVMM 2012 Console Integration Kit