HP OneView for Microsoft System Center - Manual (Page 13)

Figure 3 Host VM expands to show connected VM Ethernet Adapters
Host Fabric and Profile Elements section
The Host Fabric and Profile Elements section shows the configuration of the FlexFabric or FlexNIC
modules associated with the selected Hyper-V host.
NOTE: All FlexNICs will be reported, even ones not assigned to a profile.
Table 5 Host Fabric and Profile Elements
Comment Example Label
VC downlink ports LOM:1-a VC NIC Port
This will match the NIC interface link
status as reported by VC. Linked Link Status
Interconnect bay and port. 1-d1 I/O Bay-Port
Physical address of the host adapter. 1C:C1:DE:1D:41:0E MAC Address
List of VC Ethernet networks this
downlink port is assigned to. Only for
profile-assigned NICs.
If an adapter has multiple VC vNets
assigned, this entry will contain a button Vnet1_VLAN11 VC vNET(s)
that displays a dialog detailing all
networks when clicked.
List of IPv6 and IPv4 addresses assigned
to this NIC. May be blank if not 192.168.11.11 IP Address(es)
assigned to a profile as the OS
interprets this as a NIC with link down.
If an adapter has multiple IPs assigned,
this entry will contain a button that
when clicked displays a dialog
detailing all IPs.
Name of host adapter reported by the
OS. Acme 10/100 Ethernet Adapter OS Adapter Name
Connection name of the host adapter
as reported by the OS. Ethernet 2 OS Connection Name
Connection state of the host adapter as
reported by the OS. Connected OS Connection State
View menu 13