HP 2000SA G2-Modular-Smart-Array - Manual (Page 49)

Table 16 Possible log messages (continued)
Log
level
Log action statement Log impact statement Log message Category ID
0 VAAI COPY
command will
not work. LBC too large: nn. DEBUG 16
2 Used for SCSI
command
debugging. pp-VAAI-SENSE-MODE
CDB06: XX XX XX XX XX XX
pp-VAAI-ATS
FAILURE 17
CDB10: XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
pp-VAAI-WRITE SAME
CDB10: XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
pp-VAAI-BLOCK COPY
CDB10: XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
pp-VAAI-PARAM LIST DATA
0000: XX XX XX XX XX XX XX XX -
XX XX XX XX XX XX XX XX
| |
0010: XX XX XX XX XX XX XX XX -
XX XX XX XX XX XX XX XX
| |
0 Reduced Array
Acceleration, vmk_SgAlloc( ) returned 0xXX FAILURE 18
VAAI will not
use Hardware
Assisted
Locking.
0 Reduced Array
Acceleration, vmk_SgInit(testData)=0xXX ERROR 19
VAAI will not
use Hardware
Assisted
Locking.
0 Reduced Array
Acceleration, vmk_SgInit(setData)=0xXX ERROR 20
VAAI will not
use Hardware
Assisted
Locking.
0 No VAAI support
for this
device. Out of memory claiming device:
naa.xxaxx SYSTEM
ERROR 21
0 No VAAI support
for this
device. Out of memory allocating SCSI
command. SYSTEM
ERROR 22
0 No VAAI support
for this
device. Inquiry to device naa.xxxx
failed. I/O ERROR 23
Generating logs 49