Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 80)

B-2
ACU for DOS
Running the ACU Interactively
To run the ACU interactively:
1 Insert the ACU utility disk you created in Creating the ACU
Utility Disk .
2 Start or restart your computer.
The computer boots to the DOS command line.
3 Type ACU on the command line, then press Enter.
Select ACU options as needed using the arrow keys and the Tab
key navigate through the menus and the Enter key to select from
the following tasks:
■ Creating Arrays
■ Managing Arrays
■ Initializing Drives
■ Rescanning Drives
Note: To return to the previous menu at any time, press Esc.
For details on using the ACU interactively, see Using the ACU on
page A-2 .