Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 127)

D-24
Command Line Interface
container set cache [/read_cache_enable={boolean}]
[/unprotected={boolean}] [/write_cache_enable={boolean}]
{container}
Sets cache parameters for a specific array. Useful only if a native
OS's file system resides on the array.
Parameters
{container} —ID number of the array on which to set cache
parameters.
Switches
/read_cache_enable —Specifies whether to enable the read-
ahead cache.
/unprotected —Specifies whether to set the container's NVRAM
write-back cache to disable, enable when protected, or enable always.
Use this switch in conjunction with the /write_cache_enable
switch.
/write_cache_enable —Specifies whether to set the container's
NVRAM write-back cache to disable, enable when protected, or
enable always. Use this switch in conjunction with the
/unprotected
switch.
container set failover {container} {device_ID}
[{device_ID}...]
Assigns an automatic failover disk for a single array.
Parameters
{container} —ID number of the array on which to assign an
automatic failover disks.
{device_ID} —ID for the device to assign as a failover disk.
container set global_failover {device_ID} [{device_ID}...]
Assigns an automatic failover disk for all arrays.
Parameters
{device_ID} —ID for the device to assign as a failover disk.
container set io_delay {container} {integer}
Sets the I/O delay (in milliseconds).