Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 10)

ix
Contents
3 Installing the Driver
Overview of the Driver Installation Process 3-2
Creating the Driver Disk 3-2
Installing the Windows Driver 3-3
Installing the Driver When You Install Windows 3-3
Installing the Driver in an Existing Windows System 3-4
Installing the Linux Module 3-5
Installing the Module When You Install Red Hat 3-5
Installing the Module in an Existing Linux System 3-6
Installing the Unix Driver 3-6
OpenServer 3-6
UnixWare and OpenUNIX 3-8
Installing the NetWare Driver 3-10
Installing the Driver When You Install NetWare 3-10
Installing the Driver in an Existing NetWare System 3-11
Loading NetWare Drivers During Server Restart 3-12
4 Installing and Starting Adaptec Storage Manager
Installing Storage Manager on Windows 4-2
Installing Storage Manager on Linux 4-3
Installing Storage Manager on OpenServer 4-4
Installing Storage Manager on UnixWare & OpenUNIX 4-5
Installing Storage Manager on NetWare 4-6
Starting Storage Manager 4-7
Logging into Remote Systems 4-8
5 Understanding Adaptec Storage Manager
Introduction 5-1
Overview 5-2
Physical Devices View 5-2
Logical Devices View 5-3
Changing How Drives are Displayed 5-3
Collapsed and Expanded Views 5-4
Component Views 5-5