Automatic failover, Adaptec battery backup module – Adaptec SATA AND SCSI RAID CONTROLLERS User Manual
Page 23
1-10
Introduction
Silencing the Alarm
The alarm continues to sound until one of the following actions is
taken:
■
The array with the failed member is deleted.
■
If the array is redundant, a rebuild begins.
■
The alarm is silenced using SATASelect or SCSISelect. For
details, see the Alarm Control option on
or Adaptec
Storage Manager online Help.
Automatic Failover
Adaptec RAID controllers can automatically rebuild an array when
a failed drive is replaced with a new drive. This feature applies
only to redundant arrays in SES- or SAF-TE-enabled drive
enclosures. See
for details.
Adaptec Battery Backup Module
Adaptec RAID controllers accept an optional Adaptec battery backup
module.
Notes:
■
To see if the controller is available with battery modules,
see
Controller Features on page 1-5
.
■
To see the battery module connector location for your
controller, see
.
■
To purchase a battery module, visit
www.adaptec.com
.