Canon imagePROGRAF iPF6450 - Manual (Page 840)

Paper Type
Country or Region of Use selected when the Media Config-
uration Tool was installed
The Adjustment Types during
the execution of Auto Adjust
on the Printer Sensor
The Adjustment Types during the
execution of AutoAdjst(HiPrc) on
the Spectrophotometer Unit
Japan, Asia, Oce-
ania
EU
North or South
America
Pearl Photo 260
Unique calibration
Not available Available Not available Cannot execute
Premium Gl2 280 Available Available Available Common calibration
Prem.SemiGl2 280 Available Available Available Common calibration
Photo Pro Plat. Available Available Available Common calibration Cannot execute
LW Gloss Proof(*1) Available Not available Available Unique calibration
Unique calibration
LW Matte Proof(*1) Available Not available Available Unique calibration
Proofing Paper3 Available Not available Available Unique calibration
Proofing Paper Available Not available Available Common calibration
Proof Glossy 195 Not available Available Not available Cannot execute
Proof SemiGl 195 Not available Available Not available Unique calibration
Proof SemiGl 255 Not available Available Not available Cannot execute
Roll-UpGlossF180 Not available Available Available Cannot execute
FineArt Photo Available Available Available Common calibration
FneArt HW Photo Available Available Available Common calibration
FineArt Txtr Available Available Available Cannot execute
FA Enha. V. 255 Not available Not available Available Cannot execute
Wat Res Art CVS Not available Available Not available Cannot execute
Graphic Canvas Not available Not available Available Cannot execute
ArtMatte Canvas Not available Available Available Cannot execute
Canvas Matte2 Available Not available Available Cannot execute
*1: The RIP software is required.
Note
• If the paper you are using is not specified in media type, execute color calibration using the paper where the adjustment type
is Common calibration, then you can set the calibration adjustment values for the paper you are using.
• The settings for each media type can be changed using Media Configuration Tool.
Not available media types can be displayed in the Control Panel by changing the settings.
(See "Switching Media Types Display Show/Hide (Windows).")
→P.585
(See "Switching Media Types Display Show/Hide (Mac OS X).") →P.621
Paper Sizes that can be Used in Color Calibration
Paper sizes that can be used in color calibration differ for sheets and rolls.
For details, refer to the Paper Reference Guide.
• When executing Auto Adjust by the Printer Sensor
When Using Rolls An unused roll at least 254.0 mm (10.00 in) wide
(however, a roll at least 406.4 mm (16.00 in) wide depending on the media type)
When Using Sheets One sheet of unused paper of at least A4/Letter size
(however, one sheet of unused paper of at least A2 size depending on the paper type)
• When executing AutoAdjst(HiPrc) Using the Spectrophotometer Unit
Roll paper at least 406.4 mm (16.00 in) wide
Paper that can be used in Color Calibration iPF6450
User's Guide
Color Management
Color Calibration
840