Canon imagePROGRAF iPF6450 User Manual
Page 668
Setting Item
Description, Instructions
Adjust
Printer
Calibra-
tion
ColorCheck Print (*2)
(See "Color Checks Using the Spectrophotometer Unit (op-
tion).")
The same as ColorCheck Print in the hierarchy under Test
Print.
Pattern Size (*2)
Select the size of the adjustment pattern printed during color
calibration using the optional Spectrophotometer Unit and dur-
ing ColorCheck Print.
Normally, set to Standard.
We recommend that you set it to Large if you want to prioritize
measurement accuracy.
Calibration Log
The Date, Paper Type, and Adjustment Type for which color
calibration was executed are displayed on the Display Screen
where you can confirm them.
Common calibration and unique calibration are the Adjust-
ment Type of color calibration.
When paper is set in the printer, the history of effective color
calibration for the set paper is displayed.
When paper is not set in the printer, the latest history among
common calibration or unique calibration is displayed.
Also, a hyphen (-) is displayed when there are no execution re-
sults.
(See "Color Calibration Using the Printer Sensor.")
(See "Paper that can be used in Color Calibration.")
Use Adj. Value
Choose Disabled > OK if you prefer not to apply the color cali-
bration adjustment value in print jobs. However, printer driver
settings are given priority.
Choose Enabled > OK to apply the color calibration adjust-
ment value in print jobs. However, printer driver settings are
given priority.
Set Exec. Guide
If you select On, a message is displayed on the control panel
at the timing recommended for executing color calibration.
Return Defaults
Clear the color calibration adjustment value and the execution
log.
Mainte-
nance
Head Cleaning
Clean the Printhead. (See "Cleaning the Printhead.")
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if printing
is not improved by Head Cleaning A.
Nozzle Check
Print a test pattern to check the nozzles.
Replace P.head
Execute when replacing the Printhead. Follow the instructions
displayed to complete the required procedure. (See "Replacing
the Printhead.")
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Repl. maint cart
Execute when replacing the Maintenance Cartridge. Follow the
instructions displayed to complete the required procedure.
(See "Replacing the Maintenance Cartridge.")
Head In-
fo
Printhead L
Indicates information about the printhead.
Printhead R
Clean Platen
Move the Carriage in preparation for cleaning the Platen.
Menu Settings
iPF6450
Control Panel
Printer Menu
668