Canon imagePROGRAF iPF6450 User Manual
Page 541
Note
•
If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
•
The operations for a printer with a Spectrophotometer Unit (option) are the same as for a printer with no Spectrophotometer
Unit (option). If it is difficult to perform operations from the front of the printer, lower the Up-down Unit. (See "Lowering the Up-
down Unit of the Spectrophotometer Unit (option) Manually.")
1
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to se-
lect the
(Paper tab) .
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select "Yes", and then press the OK button.
The roll is rewound.
Important
•
If you have selected ManageRemainRoll > On in the Control
Panel menu, a barcode is printed on the leading edge of the
roll.
Do not remove the roll before the barcode is printed. You will
be unable to keep track of the amount of roll paper left. (See
"Keeping Track of the Amount of Roll Paper Left.")
5
Open the Roll Feed Unit Cover.
6
Using both hands, rotate the Roll Holder toward the
back to rewind the roll.
iPF6450
Removing the Roll from the Printer
Handling and Use of Paper
Handling rolls
541