Canon CX-1 - Manual (Page 7)

Safety Information
-7-
CAUTION
When adjusting the forward position of the main unit, be sure to move the main unit
slowly toward the patient while looking from the side of the patient, to prevent
accidental contact of the objective lens with the patient.
CAUTION
Do not place your hands or fingers or allow the patient to place his/her hands or
fingers between the stage and base. Otherwise, injury may occur.
CAUTION
When the instrument is not going to be used, turn OFF the power.
Also, unplug the power cable from the AC outlet when it is not going to be used for
long periods of time.
CAUTION
The instrument weighs approximately 26 kg (57 Ibs). Be sure that at least two
people lift the instrument to transport it and that it is lifted by gripping the
indentations for lifting. Otherwise, injury may occur.
When Problem Occurs
WARNING
Should any of the following occur, immediately turn OFF the power of each
instrument, unplug the power cable from the AC outlet, and contact your sales
representative or local Canon dealer.
• When there is smoke, an odd smell or abnormal sound.
• When liquid has been spilled into the instrument or a metal object has entered
through an opening.
• When the instrument has been dropped and it is damaged.
Maintenance and Inspection
WARNING
For safety reasons, be sure to turn OFF the power when the inspections indicated in
this manual are going to be performed. Otherwise, electric shock may result.
WARNING
When the instrument is going to be cleaned, be sure to turn OFF the power, and
unplug the power cable from the AC outlet.
Never use alcohol, benzine, thinner or any other flammable cleaning agents.
Otherwise, fire or electric shock may result.
WARNING
Clean the plug of the power cable periodically by unplugging it from the AC outlet
and removing dust or dirt from the plug, its periphery and AC outlet with a dry cloth.
If the cable is kept plugged in for a long time in a dusty, humid or sooty place, dust
around the plug will attract moisture, and this could cause insulation failure which
could result in a fire.
WARNING
The instrument must be repaired by a qualified engineer only.
If it is not repaired properly, it may cause fire, electric shock, or accident.
CAUTION For safety reasons, be sure to inspect the instrument before using it.
CAUTION
Always take a test image to check that there is no foreign matter present that can
affect image readings before using the instrument (see page 53).
Handling
!
!
!
!
!
!
!
!
!
!
!
000_L-IE-5169D_CX-1.book Page 7 Monday, July 29, 2013 10:42 AM