2 turning on the power, 1 check items on the behaviors of the equipment – Canon CX-1 User Manual
Page 52
7. Daily Inspection and Maintenance
-52-
7.1.2 Turning ON the Power
Always perform the inspections shown in the following sections to ensure proper function before use.
7.1.2.1 Check Items on the Behaviors of the Equipment
Turn on the power of all the equipment that has been connected as a system and check the following items.
Dig
ita
l came
ra
Check that the digital camera
is firmly attached and the
cables are connected
correctly.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if there is
any problem.
Lo
cation
Inspection
Result
Remedy
Month
Day
Month
Day
Month
Day
CAUTION
For safety reasons, be sure to inspect the instrument before using it.
!
Lo
ca
tio
n
Inspection
Result
Remedy
Month
Day
Month
Day
Month
Day
Main unit
Check whether the POWER
lamp lights.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if the
POWER lamp fails to light even
though the power cable is
connected properly.
Check that there are no dirt or
scratches on the objective
lens.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Clean the lens if it is dirty (see
page 57).
Contact your sales representative
or local Canon dealer if it is
scratched.
Place a sheet of paper in front
of the objective lens, turn the
brightness adjuster, and check
that the brightness for
observation changes (on the
retinal observation screen).
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if there are
no changes.
Place a sheet of paper in front
of the objective lens and press
the shutter release button to
confirm that the flash has
emitted.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if no flash is
emitted.
Set to fluorescein
angiography mode and press
the TIMER/C switch to check
that the timer starts and stops
properly.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if there are
any problems.
000_L-IE-5169D_CX-1.book Page 52 Monday, July 29, 2013 10:42 AM