Canon CX-1 - Manual (Page 20)

-20-
4. Preparation
Please ask your sales representative or local Canon dealer to perform installation of this instrument.
4.1 Power Cable Connections
1 Check that the power switch of the retinal camera is set to the O position (OFF).
2 Connect the power cable to the retinal camera.
Insert the power cable connector firmly into the AC
power connector while holding down the retinal
camera with your hand.
3 Insert the power plug into the AC outlet.
Insert the plug all the way into the AC outlet.
WARNING
Be sure to operate this instrument using the power supply described in the
specifications. Otherwise, fire or electric shock may result.
WARNING
Be sure to turn OFF the power before plugging or unplugging the cables as
indicated in this manual. Also, do not handle the cables with wet hands.
Otherwise, you may get an electric shock that may result in death or
serious injury.
CAUTION
Before connecting or disconnecting the cables, be sure to hold the
instrument firmly in order to ensure safety.
Otherwise, the main unit may fall over, possibly causing injury.
CAUTION
Always use a grounded AC outlet for a 3-pin plug as the power outlet.
OFF ON
000_L-IE-5169D_CX-1.book Page 20 Monday, July 29, 2013 10:42 AM