Canon PowerShot SX50 HS - Manual (Page 75)

75
Image Customization Features
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically
corrected as follows.
1
Access the [Built-in Flash
Settings] screen.
z z Press the < n> button, choose [Flash
Control] on the [ 4] tab, and then press
the < m> button (= 42).
2
Configure the setting.
z z Choose [Red-Eye Corr.], and then
choose [On] ( = 42).
X X Once the setting is complete, [ R] is
displayed.
z z To restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
• You can also correct existing images ( = 193).
• You can also access the screen in step 2 by holding down the < h> button for
at least one second.
• You can also access the screen in step 2 when the flash is up by pressing
the < h> button and immediately pressing the button.
COP
Y