Canon PowerShot SX50 HS - Manual (Page 21)

21
Initial Preparations
Display Language
Change the display language as needed.
1
Enter Playback mode.
z z Press the < 1> button.
2
Access the setting screen.
z z Press and hold the < m> button, and
then immediately press the < n>
button.
3
Set the display language.
z z Press the < o>
buttons or
turn the < 5> dial to choose a language,
and then press the < m> button.
X X Once the display language has been set,
the setting screen is no longer displayed.
• The current time is displayed if you wait too long in step 2 after pressing the
button before you press the < n> button. In this case, press the
button to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the < n> button
and choosing [Language ] on the [ 3] tab.
COP
Y