Canon PowerShot SX50 HS - Manual (Page 19)

19
Initial Preparations
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish ( = 61).
1
Turn the camera on.
z z Press the power button.
X X The [Date/Time] screen is displayed.
2
Set the date and time.
z z Press the < q> buttons to choose an
option.
z z Press the < o>
buttons or turn the
< 5> dial to specify the date and time.
z z When finished, press the < m> button.
3
Set the home time zone.
z z Press the < q> buttons or turn the
< 5> dial to choose your home time
zone.
4
Finish the setup process.
z z Press the < m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
z z To turn off the camera, press the power button.
COP
Y