Canon imagePROGRAF iPF9400 User Manual
Page 680
Printing Interface Print reports
1
Load the paper.
If using sheets, load paper A4/Letter-sized, you will need at least three sheets.
2
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to se-
lect the Settings/Adj. tab (
).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Interface Print, and then press the OK button.
Confirming Interface Print information
The following information is included in the Interface Print report.
Canon imagePROGRAF iPFxxxx Interface Print
Printer model
Firm
Firmware Version
Boot
Boot ROM Version
MIT(DBF)
MIT Database Format Version
MIT(DB)
MIT Database Version
S/N
Printer serial number
Date
The date when the interface setup print report was
printed.
EOP Timer
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
TCP/IPv4
Frame Type
IPv4 settings values.
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dynamic Update
Use Zeroconf Function
IP Address
Subnet Mask
Gateway Address
LPD Printing
Printing Interface Setting Reports
iPF9400
Control Panel
Printer Menu
680