Turning the printer on and off – Canon imagePROGRAF iPF9400 User Manual
Page 21
Insert the sheet between the Platen and the Paper Retainer.
•
Enlarged/reduced printing
You can freely adjust the size of originals by enlarging or reducing originals before printing.
(See "Resizing Originals to Match the Paper Size.")
(See "Resizing Originals by Entering a Scaling Value.")
•
Free Layout (Windows) and imagePROGRAF Free Layout (Macintosh)
Print multiple documents from multiple applications (such as word-processing programs, spreadsheet programs,
and so on) next to each other.
(See "Printing Multiple Originals Next to Each Other.")
Turning the Printer On and Off
Turning the Printer On and Off
Turning the printer on
1
Press the Power button to turn on the printer.
The printer will now start up.
After the Display Screen shows the Canon logo, "Start-
ing up... Please wait." is displayed.
2
The Power Lamp is lit when the printer finishes starting
up, and the printer is now in Standby.
The printer will not go into Standby in the following sit-
uations. Take the appropriate action.
•
The Top Cover is open
Close the Top Cover.
•
The Ink Tank Cover is open
Close the Ink Tank Cover.
•
The Printhead is not installed
see "Replacing the Printhead."
•
An Ink Tank is not installed
see "Replacing Ink Tanks."
•
If ERROR is shown on the Display Screen
see "Error Messages."
iPF9400
Turning the Printer On and Off
Basic Printing Workflow
Printing procedure
21