Canon imagePROGRAF iPF760 - Manual (Page 640)

Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. 1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.") →P.461
Important
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the
Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may be
askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed.
Paper not aligned with right guide. Paper not aligned with right guide.
Cause Corrective Action
When paper was loaded, it was not aligned with the guide on the right side. Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
Cannot detect papr Cannot detect papr
Cause Corrective Action
The paper has come out of the printer. Follow these step to reload a sheet.
1. Remove the paper and press the OK button.
2. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
→P.461
Follow these step to reload a sheet.
1.
Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
3. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
→P.461
Paper cutting failed. Paper cutting failed.
Cause Corrective Action
There are sheets left on the
Ejection Guide. 1. Push the Release Lever back and remove the paper.
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Paper not aligned with right guide. iPF760
User's Guide
Error Message
Messages regarding paper
640