Canon imagePROGRAF iPF760 - Manual (Page 197)

For details on available paper sizes, see "Paper Sizes →P.434 "
Paper sizes compatible with borderless printing are shown in the list.
• C Enlarged/Reduced Printing
Choose from the following options when this setting is activated.
• Resizing Originals to Match the Paper Size →P.70
• Resizing Originals to Fit the Roll Width →P.74
• Resizing Originals by Entering a Scaling Value →P.80
• D Fit Paper Size
Scales the document image to match the paper size.
• E Fit Roll Paper Width
Scales the document image to match the roll width.
• F Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• G Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes
→P.434 "
• H Orientation
Choose the printing orientation.
• Making the Original Orientation Match the Paper Orientation →P.166
• K Rotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees →P.152
• L Paper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media Type on the Main sheet.
• M Roll Paper Width
Choose the roll width.
For details on available roll widths, see "Paper Sizes
→P.434 "
iPF760 Page Setup Sheet
User's Guide
Windows Software
Printer Driver
197