Canon imagePROGRAF iPF760 - Manual (Page 575)

Printheads Printheads
Printhead ............................................................................................................................................................ 575
Checking for Nozzle Clogging ........................................................................................................................... 575
Cleaning the Printhead ....................................................................................................................................... 576
Replacing the Printhead ..................................................................................................................................... 577
Printhead Printhead
A replacement Printhead.
• Printhead PF-04
Note
• For instructions on replacing the Printhead, see "Replacing the Printhead." →P.577
Checking for Nozzle Clogging Checking for Nozzle Clogging
If printing is faint or affected by banding in different colors, make sure the Printhead nozzles are clear by printing a test
pattern to check the nozzles.
Note
• Nozzles are periodically checked to ensure they are clear. Configure the settings on the Control Panel menu in Nozzle Check.
(See "Menu Settings.")
→P.495
1
Load unused paper.
• Attaching the Roll Holder to Rolls →P.439
• Loading Rolls in the Printer →P.442
• Loading Sheets in the Printer →P.461
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
iPF760 Printhead
User's Guide
Maintenance and Consumables
Printheads
575