Canon imagePROGRAF iPF760 - Manual (Page 502)

Setting Item Description, Instructions
Interface
Setup TCP/IP IPv4 DNS Set-
tings Pri. DNS SrvAddr Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Name Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS Set-
tings DNS
Dync up-
date Statefull
Addr Specify whether DNS server registration is updated automati-
cally.
Stateless
Addr
Pri. DNS SrvAddr Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Name Specify the DNS domain name.
NetWare NetWare Specify the NetWare protocol. To apply your changes, choose
Register Setting.
Frame Type Specify the frame type to use.
Print Service Choose the print service.
AppleTalk Specify whether to use the AppleTalk protocol. To apply your
changes, choose Register Setting.
Ethernet
Driver Auto Detect Specify the communication method. To apply your changes,
choose Register Setting.
Choose On for automatic configuration of the LAN communica-
tion protocol. Choose Off to use settings values of
Comm.Mode and Ethernet Type.
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are supported over the
LAN.
MAC Address Indicates the MAC address.
Interface Print Print interface settings information.
Return Defaults Choose OK to restore Interface Setup settings to the default
values.
System
Setup Sleep Timer Specify the period before the printer enters sleep mode.
Shut Down Timer Sets the time until the printer turns off automatically. If no oper-
ations are performed on the printer for the duration of the time
set in Shut Down Timer after entering Sleep mode, the printer
automatically turns off.
Buzzer Choose On for the buzzer to sound in case of errors.
Contrast Adj. Adjust the Display Screen contrast level.
Date &
Time Date Set the current date.
Time Set the current time. Available only if the Date setting is speci-
fied.
Date Format Specify the date format.
Language Specify the language used on the Display Screen.
Menu Settings iPF760
User's Guide
Control Panel
Printer Menu
502